No adhesives, no binders, no surfactants
Thermal fusion throughout means nothing in the element can migrate into the filtrate — the difference between a clean product and an unexplained taint.
AXION Elements
Pleated, melt-blown, wound and sintered metal cartridges across the full micron range, cross-referenced to every major global part number.
- Media and construction combinations
- 40+
- Constructions
- Pleated
- Standard configurations
- 5
- Industries served
- 6
Overview
Elements built to hold their rating to the last hour.
The cartridge is the component that actually performs the filtration. Everything else in the system exists to hold it, seal it and tell you when it is finished — which is why element quality determines system performance far more than housing brand.
AXION elements are built without adhesives or surfactants. End caps are thermally fused to the media pack, cages and cores are extruded from the same polymer as the media, and nothing in the flow path can migrate into your product.
Our cross-reference library covers more than 4,000 competitor part numbers. Send what you currently buy and we return the AXION equivalent with a side-by-side comparison of rating, effective area and clean pressure drop — so the substitution is an engineering decision rather than a leap.
Loading viewer…
Specifications
Technical envelope
- Micron range
- 0.1 µm to 100 µm, nominal and absolute
- Constructions
- Pleated, melt-blown depth, string-wound, sintered metal, activated carbon
- Media
- PP, PES, PVDF, Nylon 66, PTFE, glass fibre, cellulose, SS 316L
- Lengths
- 5" to 50" in standard increments; high-flow 40" and 60"
- End caps
- DOE, 222, 226, SOE with flat, fin or bayonet variants
- O-ring materials
- Silicone, EPDM, Viton, Buna-N, PTFE-encapsulated
- Certification
- FDA CFR 21, USP Class VI, EU 1935/2004, WRAS where applicable
- Sterilisation
- Autoclave and SIP at 125 °C, cycle count stated per media
Configurations
Pleated polypropylene
General process duty, absolute rated, broad chemical compatibility.
Melt-blown depth
Graded density for high dirt-holding on variable inlet loads.
String-wound
Economical depth filtration for coarse pre-filtration duty.
Sintered metal
SS 316L for high temperature, backwashable and steam-regenerable service.
Activated carbon
Chlorine, taste, odour and organic removal in block or granular form.
Advantages
What this platform does that a catalogue item does not.
Cross-referenced to 4,000+ part numbers
Substitution is presented as a technical comparison of rating, area and pressure drop, so the change is verifiable before it is ordered.
Batch traceable to raw polymer
Every element carries a lot number traceable to resin batch, production line and operator, retained for ten years.
Rated by test, not by nominal
Absolute grades are qualified by ISO 16889 multipass with the beta ratio published alongside the micron figure.
Applications
Where it is installed
- Final filtration of parenteral and ophthalmic products
- Wine, beer and spirits clarification and stabilisation
- Deionised water polishing in electronics manufacturing
- Solvent, acid and plating-chemistry purification
- Hydraulic and lube oil conditioning
- Potable water treatment at point of entry
Industries
Sectors this platform serves
Technical drawings
Issued with every order
Element dimensional chart
OD, ID and length by construction and end-cap type.
Clean pressure drop curves
By micron rating, flow and fluid viscosity.
End cap identification guide
Visual reference for 222, 226, DOE and SOE geometries.
Chemical compatibility matrix
Media and O-ring compatibility across 200+ fluids.
FAQs
Questions engineers ask about filter cartridges
Beta is upstream particle count divided by downstream count at a given size. β = 5000 means 5,000 particles enter for every one that passes — 99.98% efficiency. Higher beta at a stated micron size is the only rigorous way to compare two elements.
Related platforms
Frequently specified alongside
Next step
Specify the filter cartridges for your duty.
Send flow, contaminant, rating, chemistry and available pressure. We return a configuration with the sizing basis attached.
Or call +91 79 4890 2200 · sales@worldasatech.com