Individually scan-tested HEPA
Each element is tested and serial-numbered against EN 1822 — you receive the certificate for your filter, not for its batch.
AERIS Series
Intake, compressed-air and process-air filtration from G4 pre-filters through H14 HEPA, rated to EN 1822 and ISO 16890.
- H14 HEPA capture at MPPS
- 99.995%
- HEPA efficiency
- 99.95% (H13) to 99.995% (H14) at MPPS
- Standard configurations
- 5
- Industries served
- 6
Overview
Clean air upstream of everything that matters.
Air filtration is graded, not singular. A gas turbine intake, a compressor suction and a cleanroom terminal each need a different stage — and putting a fine filter where a coarse one belongs simply converts capital into pressure drop.
The AERIS range is built as a staged system: G4 and M5 panels take the bulk load, F7 to F9 bag and compact filters handle fine particulate, and E11 to H14 HEPA elements deliver the final barrier. Each stage is selected so that the one behind it never sees a load it was not designed for.
Every HEPA element is individually scan-tested to EN 1822 and shipped with its own efficiency certificate carrying the element serial number. A batch certificate tells you about a population; a scan test tells you about the filter now sitting in your ceiling grid.
Loading viewer…
Specifications
Technical envelope
- Efficiency classes
- ISO Coarse / ePM10 / ePM2.5 / ePM1 (ISO 16890); E10–H14 (EN 1822)
- HEPA efficiency
- 99.95% (H13) to 99.995% (H14) at MPPS, individually scan tested
- Media
- Synthetic polyester, glass microfibre, PTFE membrane, activated carbon
- Frame materials
- Galvanised steel, aluminium, SS 304/316, MDF, plastic
- Face velocity
- 0.45 m/s nominal, up to 2.5 m/s for coarse stages
- Initial pressure drop
- 35 Pa (G4) to 250 Pa (H14) at rated flow
- Operating temperature
- Up to 80 °C standard, 250 °C high-temperature construction
- Fire rating
- UL 900 Class 1 / EN 13501 available
Configurations
AERIS-P
Panel and pleated pre-filters, G3 to M6, for bulk loading duty.
AERIS-B
Pocket and bag filters, F7 to F9, with sealed header frames.
AERIS-C
Compact V-cell rigid filters delivering high area in a shallow depth.
AERIS-H
HEPA and ULPA modules, E11 to U15, individually scan tested.
AERIS-GT
Gas turbine intake cassettes with hydrophobic and pulse-jet options.
Advantages
What this platform does that a catalogue item does not.
Staged so each filter does its own job
Pre-filter selection is matched to the fine stage behind it, extending final-filter life two to three times over an unstaged install.
Energy cost quantified up front
We supply the annual fan-energy cost at your operating hours and tariff, because pressure drop is the dominant lifetime cost of an air filter.
Gasket and frame sealed as a system
Continuous-pour polyurethane gaskets and rigid frames eliminate the bypass leaks that quietly defeat high-efficiency media.
Applications
Where it is installed
- Gas turbine and compressor inlet air conditioning
- Cleanroom terminal and ceiling-grid filtration
- Paint booth supply and extraction
- HVAC air handling in pharmaceutical and food facilities
- Electronics assembly and semiconductor fab make-up air
- Engine and generator intake protection
Industries
Sectors this platform serves
Technical drawings
Issued with every order
Frame and cell dimensions
Standard and custom face sizes with depth options.
Pressure drop vs. airflow
Initial and final resistance across the flow range.
Holding frame detail
Gasket seating and clamping arrangement.
Staging schematic
Recommended pre-filter and final-filter combinations.
FAQs
Questions engineers ask about industrial air filters
ISO 16890 replaced EN 779 for coarse and fine filters. It classifies by fractional efficiency against ePM1, ePM2.5 and ePM10 rather than a single average value, which is far closer to how the filter actually performs in service.
Related platforms
Frequently specified alongside
Next step
Specify the industrial air filters for your duty.
Send flow, contaminant, rating, chemistry and available pressure. We return a configuration with the sizing basis attached.
Or call +91 79 4890 2200 · sales@worldasatech.com